About the

RS Pro Strip Tank

A machine designed for the use of removing paint from alloy wheels. Achieved by heating a purpose manufactured water-based chemical (RSP01) and flowing it over the wheels and utilising the steam
produced in the heating process to further aid stripping. The Pro Strip then controls the steam to atmosphere.


The Pro Strip is designed to remove the paint solids from the chemical at the primary stage and minimise the user exposure to the chemical.

Buy Now

KEY SAFETY FEATURES

  • Uses a more environmentally friendly water-based chemical.
  • Chemical is enclosed in a separate tank, reducing any risk of any submersible type accidents.
  • Minimal user exposure to the chemical.
  • Adjustable levelling feet for accurate installation.
  • Cycle timer and LED indication beacon. Green for running – red for stopped.
  • Chemical low and full level LED indicator, cutting off power to the heaters if too low.
  • Large front swing door with safety door lock  stops entry whilst in operation.
  • At the end of the cycle the air inlet valve opens to introduce fresh cool air to clear the steam via the extractor.
  • Automatic twin speed extraction system. Only allows access to the wheel working area when safe and clear.
  • 24-hour, 7-day timer for automatic heater control. Have the machine ready to use when you need it.
  • Low maintenance further lowering the user exposure to the chemical.

INFO & DIMENSIONS

  • Key Features
  • Required
  • Machine
  • Fan
  • Flange

Key Features

  • Minimal maintenance and upkeep due to the specially designed, self-cleaning filter system which constantly removes paint solids.
  • Chemical runs consistently at less than 3% solids. No more problems with paint solid build up!
  • 24 to 27 wheels per load depending on wheel sizes.
  • Compact design saves space.
  • Easy to use – load wheels, close the door, push reset/start button, and walk away.
  • 600 litre tank capacity, low initial chemical costs!
  • Fast heat up time and sustained temperature due to minimal chemical and good insulation.
  • Variable speed pump system with welded external pipework.
  • Intelligent twin speed extraction unit to take chemical steam away from the operator.
  • Operator’s viewing window to help productivity.
  • HMI touch screen programme, timed heaters – hourly/daily/weekly.
  • Day/Evening mode with easy-to-use adjustable cycle timer.
  • NO FILTER PRESS NEEDED !

Training, Shipping and delivery to UK mainland destinations are included in the price.

POWER SUPPLY

  • The RS Pro Strip requires a 3 phase 400v 32amp power supply with a neutral and earth.
  • The Pro Strip max power output is 20kwh at 28amps.
  • The RS Pro Strip will be supplied with no plug or electric cable if supplied outside of the UK mainland,  you will need a qualified electrician to hard wire the machine to your supply or to fit a plug.

 

  • UK MAINLAND PLUG
  • If the RS Pro Strip is supplied to the UK mainland, a 3-phase 5 pin (with a neutral) plug can be fitted on request.
  • A matching socket, preferably with an isolator switch needs to be in place prior to the delivery.

AIR SUPPLY

  • No air needed. The Pro Strip requires no air supply.

EXTRACTION DUCTING

The fan unit is 450mm, however a reduced 300mm ducting can be used.

The ducting can be mounted vertically or horizontal by fitting a 90° bend.